Code 8024402f While Installing Windows update Fixed
Содержание:
How to fix Windows 10 update error 0x80244022
FMicrosoft regularly releases updates in order to fix bugs, add new features or just make the Windows 10 system more stable,. Applying all these updates is therefore recommended, especially if you want to keep everything secured against malware attacks. Anyway, on paper everything looks good, but what should you do when the update process itself cannot be completed?
If you recently tried to find and apply certain update patches on your Windows 10 device, but couldn’t because of the 0x80244022 error code, you are in the right place. This tutorial will help you to repair the update engine.
Windows update error 0x80244022: Why does it occur?
The 0x80244022 error code is associated with a dedicated software update issue and is displayed when a connection problem occurs in the middle of the update operation.If you receive this error you shouldn’t panic – there is nothing wrong with your Windows 10 system and usually the problem can be fixed easily.
Note: the error code is not describing a system problem but an interrupted connection between your device and Microsoft’s servers.
The behavior for this system bug is the following one: you decide to check for updates and you run the Windows 10 Update feature. Somewhere the process gets interrupted and you get this message: ‘There were some problems installing updates, but we’ll try again later. If you keep seeing this and want to search the web or contact support for information, this may help: (0x80244022)’.
If you are currently trying to find the perfect fix for this malfunction, you should also try the troubleshooting solutions listed below.
Use Windows Update Troubleshooter
As usual, Microsoft is trying to offer the right software in order to guide you through different troubleshooting methods. Well, in this case we should discuss about the Windows Update Troubleshooter which is a tool that once initiated will scan your computer for certain errors.
If any problems are found, then this official troubleshooter will address all the malfunctions automatically. You can run the Windows Update Troubleshooter from the Settings page.
- Go to Settings > Update > select Troubleshoot
- Go to ‘Get up and running’ > select Windows Update.
Restart your computer
In most situations the Windows update error code 0x80244022 signals an overloaded service. Shortly, if you try to apply various update files at once, or if the server is busy, you can experience this update issue. So, among the first solutions to apply, you should also include a restart. In this way you can initiate a clean scan operation, which might even work this time.
Verify the date and the time
This is another fix that might not be considered by most of us – its simplicity might be the reason why. However, if Date and Time aren’t set correctly, the updates cannot be installed on your computer (this is a default security measure on Windows 10).
The bottom line is that you should adjust these system settings before reapplying the update sequence.
Install the updates manually
This is quite a complicated operation – not because it’s complex or anything but because it’s time consuming. Anyway, if you have enough time to spend on trying to get pass the Windows update error code 0x80244022 malfunction, try to install the update packages manually.
You first need to note down the version number for each update file – access Update History and locate the latest Windows 10 KBs; then write down the KB numbers. Finally, access the official Microsoft Update Catalog and search the KB codes noted down earlier. Download each update package and install it manually on your Windows 10 device.
Repair system errors causing Windows Update issues
As usual, if system files are missing or if something got corrupted during other processes, you won’t be able to receive and apply further updates. So, you should run a dedicated troubleshooting command.
- First, you need to run elevated command prompt: right-click on the Windows Start icon and choose Command Prompt (Admin).
- The first command that must be executed here is DISM.exe /Online /Cleanup-image /Restorehealth.
- Press Enter and wait while the process runs.
- Afterwards, enter and execute sfc /scannow.
- As soon as this troubleshooter ends you should initiate the update process again.
The guidelines from above should clarify why the Windows update error 0x80244022 occurs. Also, the solutions listed in this tutorial should fix this error, so hopefully you can now update your Windows 10 device.
RELATED STORIES TO CHECK OUT:
Как исправить ошибку обновления Windows 10
При обновлении Windows некоторые пользователи сталкиваются с проблемой, имеющей кодовое название 0x80240034, ошибка обновления Windows 10. О том, как устранить проблему, рассказано в этой статье.
Причины появления неисправности
Факторы, вызывающие ошибку обновления:
- перегрузка серверов Центра обновления Windows;
- отсутствие подключения к Сети;
- недостаточная пропускная способность Интернет-соединения;
- сбой Центра обновлений Windows;
- повреждения компонентов ОС;
- вмешательство в обновление антивирусного ПО;
- отсутствие .NET Framework 3.5.
Проблема решается без необходимости переустановки ОС.
Методы исправления
Чтобы исправить ошибку, нужно воспользоваться одним из перечисленных ниже методов. После выполнения каждого из них стоит проверять, устранилась ли неполадка.
Стандартный способ
При возникновении проблем Windows предлагает использовать утилиту Устранения неполадок.
- Откройте «Пуск» → «Параметры».
- Перейдите в «Устранение неполадок».
- Нажмите «Устранение неполадок с помощью Центра обновления Windows».
- Дождитесь окончания процесса поиска и исправления проблем.
Смена типа запуска служб
Проблема может возникать из-за отключенных служб, требуемых для обновления Windows 10. Нужно указать им автоматический тип запуска.
- Нажмите Ctrl + X → «Командная строка (администратор)».
- Введите по очереди следующие команды, завершая ввод нажатием Enter:
- SC config wuauserv start=auto
- SC config bits start=auto
- SC config cryptsvc start=auto
- SC config trustedinstaller start=auto
- Перезагрузите ПК.
Включение .NET Framework 3.5
Для полноценного обновления ОС необходимо включить библиотеку .NET Framework 3.5.
- Нажмите «Ctrl + X» → «Панель управления».
- Выберите «Включение или отключение компонентов Windows».
- Поставьте галочку напротив .NET Framework 3.5 → «OK».
- Перезапустите компьютер.
Сброс компонентов Центра обновлений
Иногда случается сбой некоторых элементов Windows. Их необходимо сбросить.
- Нажмите Ctrl + X → «Командная строка (администратор)».
- Выполните поочередно следующие команды:Совет! Используйте стрелку «Вверх» на клавиатуре, чтобы подставить предыдущую выполненную инструкцию и редактировать ее.
- net stop bits
- net stop wuauserv appidsvc
- net stop
- net stop cryptsvc
- Del «%ALLUSERSPROFILE%\Application Data\Microsoftetwork\Downloader\qmgr*.dat»
- sc.exe sdset bits D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)
- sc.exe sdset wuauserv D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)
- cd /d %windir%\system32
- regsvr32.exe atl.dll
- regsvr32.exe urlmon.dll
- regsvr32.exe mshtml.dll
- regsvr32.exe shdocvw.dll
- regsvr32.exe browseui.dll
- regsvr32.exe jscript.dll
- regsvr32.exe vbscript.dll
- regsvr32.exe scrrun.dll
- regsvr32.exe msxml.dll
- regsvr32.exe msxml3.dll
- regsvr32.exe msxml6.dll
- regsvr32.exe actxprxy.dll
- regsvr32.exe softpub.dll
- regsvr32.exe wintrust.dll
- regsvr32.exe dssenh.dll
- regsvr32.exe rsaenh.dll
- regsvr32.exe gpkcsp.dll
- regsvr32.exe sccbase.dll
- regsvr32.exe slbcsp.dll
- regsvr32.exe cryptdlg.dll
- regsvr32.exe oleaut32.dll
- regsvr32.exe ole32.dll
- regsvr32.exe shell32.dll
- regsvr32.exe initpki.dll
- regsvr32.exe wuapi.dll
- regsvr32.exe wuaueng.dll
- regsvr32.exe wuaueng1.dll
- regsvr32.exe wucltui.dll
- regsvr32.exe wups.dll
- regsvr32.exe wups2.dll
- regsvr32.exe wuweb.dll
- regsvr32.exe qmgr.dll
- regsvr32.exe qmgrprxy.dll
- regsvr32.exe wucltux.dll
- regsvr32.exe muweb.dll
- regsvr32.exe wuwebv.dll
- netsh winsock reset
- netsh winhttp reset proxy
- net start bits
- net start wuauserv
- net start appidsvc
- net start cryptsvc
Выводы
Чтобы устранить ошибку обновления Windows 10, необходимо воспользоваться утилитой Устранения неполадок, изменить тип запуска служб, включить .NET Framework 3.5 или сбросить компоненты Центра обновлений.
Понравилась публикация? Оцените её! (1 5,00 из 5)Для того чтобы оценить запись, вы должны быть зарегистрированным пользователем сайта. Загрузка…
- Теги
- Windows 10
- Обновление
- Ошибка
Causes of Error Code 8024402f on Windows PC
Several factors are responsible for causing this error. While minor are very minor, others turn out to be a bit complicated. Some of the causative factors include but not limited to;
- Unstable/unreliable Internet connection.
- Installed anti-virus/malware program.
- Lack of communication between your computer and Windows Update Center.
- Incorrect proxy settings.
There are several solutions to error 8024402f. Most of the solutions are simple procedures that you can initiate even without any technical knowledge of computers.
How to fix error code 8024402f Easy steps
Method 1 – Basic Troubleshooting to fix Code 8024402f
Windows updates can fail to install because of a minor issues. Consider disabling the installed anti-virus/malware program and firewall before you try to install the updates again. Y
ou also need to ensure that there are no active filters in addition to ensuring that your Internet connection is stable. Try these simple housekeeping measures to see whether or not doing so resolves the error code 8024402f.
Method 2 – Manual Update Installation
You have the option of installing downloaded updates manually in case the above housekeeping measures do not resolve the error. This makes it necessary to access the Windows update log file to ascertain which update(s) failed to install.
- Press the combination of Win and R keys to open the Run box.
- Type “windowsupdate.log” in the box before clicking “OK”.
- You should be presented with a notepad file showing the date in the first column. Go to the bottom of the file to see latest entries. You should be able to find a date and an update that failed to install. Note the failed update or updates, close everything and search for the folder in which the update or updates was downloaded to.
- Click “Start”.
- Type “cmd” in the “Run” box and click “OK” to open a command prompt.
- Type “dism/online/add-package/packagepath:C\update\myupdate.cab. The part “C:\update\myupdate.cab” should reflect name of the folder you noted earlier where the update was downloaded to.
- Press “Enter” for the update to be installed.
Manually trying to install update should work in most cases. Doing it manually will fix any error like code 8024402f that is caused if you try to install updates from Windows update feature.
Method 3 – Check Windows Update Service
- Press the combination of Win + R keys.
- Type “services.msc”.
- Locate the following services and ascertain whether or not they are running; Windows Update Services, MSI Installer, BITS, and Cryptographic.
- Right-click on any services that are stopped and click to start them.
- Restart your computer and try the installation again to see whether or not the error is resolved.
Method 4 – Check Time Settings
Windows error code 8024402f can easily occur because of something as simple as incorrect time settings.
- Access your computer’s control panel.
- Select the “Clock, Language, and Region” option.
- Select “Date and Time” to open another window.
- Click on “Change Time Zone” before setting the correct time zone.
- Click “OK” before restarting your computer before installing the update to see whether or not the error 8024402f persists.
Method 5 – System Restore
You have the option of restoring your computer to an earlier date. This option can be helpful in case you downloaded and installed a program or application that may have interfered with update files.
The following procedure is specifically for Windows 8 OS but should give you an idea on how to the same on any other Windows OS.
- Press the combination of Win + Q key.
- Click on “Settings”.
- Choose “Recovery” icon.
- Select “System Restore” from the resultant open window.
- Choose an earlier date when your computer worked without any issues.
- The tool should start to run before shutting down the computer and restarting it again.
- Try installing updates to see whether or not this resolves the 8024402f code.
Although it is almost impossible to prevent all Windows errors, there are some errors that you can easily prevent and save on time you would waste finding solutions.
Error Code 8024402f is one such error. One great way you can prevent the error is to install and run the anti-virus program on a regular basis. It is also important that you only download programs and apps from reliable sites.
Windows update error 80244022
A few days ago I updated my office laptop to Windows 10 build 1703. This part passed fine. However, after the reboot, Windows update reported an error with code 80244022. The explanation of this error is unclear – something went wrong.
After a few restarts, many retries, even deletion of the Software Distribution folder from the Windows folder, I searched the Net. Many answers were “it’s just gone”. As my error isn’t just gone with the wind, I knew that it’s time for the HEV suite, crowbar and deep dive into the world of logs and Windows services.
It’s a time for the tactical plan. We need to step by step check the whole update process. The high level flow of the update process is this:
Our computer is a WSUS client and it will connect to the local WSUS server. That WSUS server is a client for the Microsoft WSUS server.
In case that you’re a home user or your company doesn’t utilize the WSUS server, your computer will be the client for the Microsoft WSUS server.
The high-level plan
If you can’t download the newer updates, you should try this plan:
- Locate your WSUS server
- Check your network connection
- Check your update client.
- Try to reboot your machine and try updating again
- Try to stop your AV program.
- Check your firewall settings
- Check the logs on the machine
- (Optionally) delete all previously downloaded updates
- Check the WSUS server
Checking the WSUS settings in Registry
You can check the WSUS settings for your computer. This is important if you’re a home user, as you wouldn’t use the WSUS server. You can check this in the key HKLM\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate, value WUServer.
Now, only if you’re sure that you shouldn’t use the WSUS server, you can delete the values from this key. Restart the Windows update service. This could solve your problem.
Checking the logs
We will fast forward to the 7th step. As I always to say, the logs are my best friends. We should start with the Windows update client log. This log is usually located on the path C:\Windows\SoftwareDistribution\ReportingEvents.log.
I opened it, but it wasn’t helpful at all:
I have only the error code and the longer message that the update failed with the error 0x80244022.
The good news is that there is another log – C:\Windows\WindowsUpdate.log. Inside you should see a more detailed explanation about the Windows update process.
In Windows 10, this file is empty. But you can generate it with the powershell command – Get-WindowsUpdateLog. Just open the powershell window and execute the command. Be patient.
After a while, this command will generate this log for you on the desktop. Now we can open it and analyze every step.
I analyzed all those lines and identified that the URL of WSUS service is correct. However, I found the HTTP error 503 – Service unavailable. This is progress.
I can conclude that my WSUS client works and that an error is on the WSUS side. It’s time to take the game to the next level.
Checking the WSUS server
I logged on the WSUS server. Now, I will check the services.
OK, all services are running. That looks good. The next step is the IIS console, as the error is HTTP (Web) related.
I opened the IIS management console. Everything looks fine. As the first step, I checked the Web site WSUS Administration and its bindings. It should be bound to the port 8530 for HTTP traffic. There should be one more binding for HTTPS on the port 8531, but this one is not so important now.
I tried to open the Web page from the IIS console. I got the same error as when I accessed the page from IE – Service unavailable.
Now I recall that this application is also .net based. Therefore, I switched to the Application pools page and found the problem.
The WSUS application uses its own pool named WsusPool. This pool was stopped. I started it again and… voila! The WSUS service runs again.
Is this the end?
This WSUS server is a part of the SCCM server. Therefore, the problem can be in any service that works on that server.
I faced this problem a few times in a row and found how to manually fix it. However, I would to have a permanent solution. My first action for the permanent solution is to shorten the idle time-out from 20 to 5 minutes. Also, it’s wise to increase the pool’s internal memory.
Although this problem can appear again, it’s important that I have a very clear procedure for the troubleshooting process. Furthermore, I now have a documented solution for this issue, which will help us to recover the WSUS server much faster.
Be systematic and don’t give up to easy.
(Edit 28.09.2017.) A permanent solution is described in detail in this post.
Stay tuned.
